Cisco 500-220 ECMS Exam Prep Questions

Engineering Cisco Meraki Solutions v1.0 500-220 exam prep questions are online, which are the best material for you to study the test. Cisco 500-220 ECMS exam tests your knowledge and skills to engineering Meraki solutions including cloud management, design, implementing, monitoring, and troubleshooting. Test Cisco certification 500-220 ECMS exam free prep questions below.

Page 1 of 3

1. Which Meraki Dashboard menu section is accessed to enable Sentry enrollment on an SSID?

Wireless > Configure > Access Control

Wireless > Configure > Splash page

Wireless > Configure > Firewall & Traffic Shaping

Wireless > Configure > SSIDs

2. Refer to the exhibit.

What are the Loss and Average Latency statistics based on?

responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page

responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page

responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page

responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page

3. Which three verbs of request are available in the Cisco Meraki API? (Choose three.)

SET

PUT

PATCH

ADD

POST

GET

4. Refer to the exhibit.

Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?

WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the “Conf” performance class.

WebEx traffic will prefer WAN 1 as it is the primary uplink.

WebEx traffic will prefer WAN 2 as long as it is up.

WebEx traffic will be load-balanced between both active WAN links.

5. When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?

Content filtering

Bridge mode

802.11r

Dual band operating with Band Steering

6. What is a feature of distributed Layer 3 roaming?

An MX Security Appliance is not required as a concentrator.

An MX Security Appliance is required as a concentrator.

All wireless client traffic can be split-tunneled.

All wireless client traffic is tunneled.

7. Refer to the exhibit.

What are two outcomes reflected in the Web App Health application? (Choose two.)

Users on both networks may be experiencing issues when attempting to reach Google.

Network #1 could not load Google because of a remote server issue.

Network #2 had better application performance than Network #1.

Network #2 could not load Google because of a local client misconfiguration.

Neither network recorded any server-side performance issues.

8. Which two primary metrics does Meraki Insight use to calculate the Application Performance Score? (Choose two.)

Maximum Jitter

Total Bandwidth Usage

Maximum Latency

Per-flow Goodput

Application Response Time

9. One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used.

Based on client count, how many APs (rounded to the nearest whole number) are needed?

10. Refer to the exhibit.

A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.

What is the next hop for the packet, based on this concentrator routing table?

The concentrator gateway (10.128.124.62) is the next hop.

Not enough detail is available to determine the next hop.

The packet is stopped.

The Auto VPN peer “Store 1532 C appliance” is the next hop.

Page 2 of 3

11. Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?

No configuration step is necessary; automatic updating is the default behavior.

Configure automatic updating of iOS devices in the Meraki installed profile.

Create a security policy that enables automatic updates.

Create a profile with automatic update enabled and apply it to iOS devices.

12. What occurs when a configuration change is made to an MX network that is bound to a configuration template?

The configuration change in the bound network is combined with the template configuration inside the template.

The more restrictive configuration is preferred.

The configuration change in the bound network overrides the template configuration.

The template configuration overrides the configuration change in the bound network.

13. Refer to the exhibit.

This Dashboard organization uses Co-Termination licensing model.

What happens when an additional seven APs are claimed on this network without adding licenses?

All APs immediately stop functioning.

All network devices stop functioning in 30 days.

One AP Immediately stops functioning.

All APs stop functioning in 30 days.

14. Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?

highest VLAN ID that is configured and set to NO to use VPN

lowest VLAN ID that is configured and set to YES to use VPN

highest VLAN ID that is configured and set to YES to use VPN

lowest VLAN ID configured and set to NO to use VPN

15. What is the best practice Systems Manager enrollment method when deploying corporate-owned iOS devices?

manual

Apple Configurator

Sentry enrollment

DEP

16. Refer to the exhibit.

What is an advantage of implementing inter-VLAN routing on an MX Security Appliance rather than performing inter-VLAN routing on an MS Series Switch?

The MX appliance performs IDS/IPS for inter-VLAN traffic.

The MX appliance performs AMP for inter-VLAN traffic.

The MX appliance performs data encryption for inter-VLAN traffic.

The MX appliance performs content filtering for inter-VLAN traffic.

17. Which design requirement is met by implementing syslog versus SNMP?

when automation capabilities are needed

when proactive alerts for critical events must be generated

when organization-wide information must be collected

when information such as flows and client connectivity must be gathered

18. When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)

Controller disconnection behavior

Captive Portal strength

Simultaneous logins

Firewall & traffic shaping

RADIUS for splash page settings

19. For which two reasons can an organization become “Out of License”? (Choose two.)

licenses that are in the wrong network

more hardware devices than device licenses

expired device license

licenses that do not match the serial numbers in the organization

MR licenses that do not match the MR models in the organization

20. Refer to the exhibit.

For an AP that displays this alert, which network access control method must be in use?

preshared key

WPA2-enterprise with my RADIUS server

splash page with my RADIUS server

MAC-based access control with RADIUS server

Page 3 of 3

21. Which type of authentication protocol is used when using OSPF on an MX appliance?

MD5

certificate

plaintext

SHA-1

22. Which information is used to calculate whether a WAN link has high usage?

data under Security & SD WAN > Appliance Status > Uplink > Live Data

total historical throughput of an uplink

total number of devices that are actively passing traffic

value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration