PdfPrep.com

Which report includes this information?

The administrator needs to create a report that shows all controllers, APs, and Cisco 3300 Series MSEs in the WLAN, including hardware and software information.

Which report includes this information?
A . Device > Inventory
B . Mesh > Nodes
C . Network Summary > Executive Summary
D . Network Summary > 802.11 Summary

Answer: A

Explanation:

In the left sidebar menu, all of the inventory report options are listed. These reports are generated based on the data already stored in the WCS database. Because inventory reports are not on-demand reports, some configuration changes may have occurred since the storage and may not duplicate the attributes of the controller that are reflected in the stored data. The choices are as follows:

Access Point Inventory Report –Provides data on deployed access points. The data that is returned includes but is not limited to the following: the access points’ MAC address, model, location, and radio status. location appliances.

Controller Inventory Report –Provides data on deployed controllers. The data that is returned includes but

is not limited to the following: the model, IP address, and serial number of the controller, what software version it is running, and where it is located.

Location Server Inventory Report –Provides data on deployed location appliances. The data that is returned includes but is not limited to the following: the IP address and version of the location appliance, which port is being used, and the time the appliance starts up. http://www.cisco.com/c/en/us/td/docs/wireless/wcs/4-1/configuration/guide/wcscfg41/ wcsreps.html#wp1080212