Aruba Certified Mobility Associate Exam HPE6-A70 Replaces HPE6-A42

Pdfprep2021-04-09T09:04:04+00:00

We all know that HPE6-A42 exam has been retired, and the new replacement test is HPE6-A70 Aruba Certified Mobility Associate Exam. HP certification HPE6-A70 exam tests your knowledge and skills to deploy AOS 8 single-site, on premise, geographically simple enterprise WLANs. Study the latest HPE6-A70 exam questions to prepare this test well.

Page 1 of 3

1. A company plans to deploy a Mobility Master (MM) solution with two MM nodes. The MM solution will manage 10 Mobility Controller (MC) appliance that will control a total of 400 APs.

How should the network administrator install the AP licenses?

40 AP licenses on the MM and no licenses on the MC

400 AP licenses on the MM and no licenses on the MC

800 AP licenses on each MC and no licenses on the MM

800 AP licenses on the MM and 40 AP licenses on each MC

2. A company has an Aruba Mobility Master (MM)-based solution. Under which circumstance will an AP radio change channel without the use of the Mobility Master (MM)?

when the MM detects that a different channel has significant better quality

when the AP detects a large amount of interference on its channel

when the Mobility Controller (MC) detects a rogue AP on the channel

when the Client Match rules indicate that nearby clients do not support the current channel

3. Refer to the exhibits.

Exhibit 1

Exhibit 2

Exhibit 3

A network administrator creates a guest WLAN on an Aruba Mobility Manager (MM). The exhibits show some of the settings for the WLAN. The administrator does not change the policies for those roles.

How does the firewall control guest clients when they first connect to the WLAN?

It permits them to send any DHCP traffic and DNS and web traffic to the Internet. It redirects web traffic destined to the private network to a login portal.

It does not permit them to send any traffic until they are authenticated.

It permits them to send any DHCP and DNS traffic, and it redirects all web traffic to a login portal.

It permits them to send any DHCP and RADIUS traffic. It redirects all web traffic destined to the Internet to a login portal and drops web traffic destined to the private network.

4. Which Aruba controller supports a maximum of 512 APs?

Aruba 7210

Aruba 7240

Aruba 7010

Aruba 7030

5. A Mobility Controller (MC) runs ArubaOS 8.

What is a valid reason for an administrator to set the MC to master-local mode?

The company needs to manage third-party network infrastructure devices with the use of the master controller interface.

The company already has a partially hierarchical deployment based on the 6.x code and wants to keep the current architecture.

The company requires a centralized licensing architecture that provides global license pools.

The company wants a deployment architecture that allows administrators to configure all MC settings from a single location.

6. A company has a Mobility Master (MM)-based solution. There is a hardware issue with the MM appliance, and, as result, all connectivity is lost between the appliance and the network. The network manager is concerned about how this will impact licensing.

How will the Mobility Controller (MC) be affected?

The MC maintains its current licenses for 30 days.

The MC loses all licenses and cannot support APs or clients.

The MC contacts Aruba Activate and uses the licensing limits defined there.

The MC maintains only licenses that have been locally installed on it.

7. What is an example of Layer 2 wireless threat that a wireless intrusion detection system (WIDS) should detect?

spyware

RF jamming

Bluetooth interference

802.11 association floods

8. A company has an Aruba Mobility Master (MM)-based solution. A network administrator wants to collect and analyze information about clients and access points (APs) over extended periods of time.

What should the administrator do to achieve this goal?

Run a Traffic Analysis report on the M

Add Aruba AirWave to the solution.

Enable archival from the MM interface Maintenance windows.

Make sure that MM has sufficient AppRF licenses.

9. A company deploys an Aruba wireless solution for the first time. In which deployment is clustering supported?

deployment as Mobility Masters (MMs)

deployment in 7000 Series standalone mode

deployment as a standalone VMC

deployment in master-local mode

10. Refer to the exhibits.

Exhibit 1

Exhibit 2

A company has an Aruba solution. Client 1 is assigned to the users1 role, and Client 2 is assigned to the users2 role. The exhibits show current firewall rules for those roles. The network1 alias used to be 10.1.1.0/24, but the network administrator now changes the network1 alias to 172.16.1.0/24. Client 1 and Client 2 both then send a packet destined to 172.16.1.10.

How does the firewall handle these packets?

It denies both packets.

It denies the packet from Client 1 and permits the packet from Client 2.

It permits both packets.

It permits the packet from Client 1 and denies the packet from Client 2.

Page 2 of 3

11. Which task can an Aruba Spectrum Monitor (SM) perform?

Prevent client connections to rogue APs.

Analyze RF signals to determine the cause of non-802.11 interference.

Optimize RF through the AP channel and transmit power plans.

Analyze wireless traffic patterns at the application level.

12. A company has an Aruba solution with a guest WLAN named exam_guest. A network administrator creates the guest WLAN with the wizard and does not change any of the default roles. The authentication server does not send particular role assignments for authorized users. The company wants to deny guests access to specific IP ranges after the guest authenticate.

For which role should the administrator create the rule to deny this traffic?

guest

authorized

exam_guest-guest-logon

guest-logon

13. A network administrator creates the role employees and adds this rule to it:

user any any permit

The first several wireless clients assigned to the employees role are assigned IP addresses in the 10.10.10.0/24 subnet. Several other wireless clients with the employees role are then assigned IP addresses in the 10.10.20.0/24.

When the Aruba firewall matches traffic from these clients to the user any any permit rule, what does it do?

It permits traffic from wireless clients in both the 10.10.10.0/24 and 10.10.20.0/24 subnet as long as the packet has a source I

It permits the traffic from wireless clients in the 10.10.20.0/24 subnet, but drops the traffic from wireless clients in the 10.10.10.0/24 subnet.

It drops traffic from wireless clients in both the 10.10.10.0/24 and 10.10.20.0/24 subnet.

It permits the traffic from wireless clients in the 10.10.10.0/24 subnet, but drops the traffic from wireless clients in the 10.10.20.0/24 subnet.

14. A company has many 7220 controllers in its Aruba wireless architecture. A network administrator wants to use the Traffic Analysis dashboard in order to monitor which type of applications are being used by wireless users.

What is required for this implementation?

AirMatch and ClientMatch must be enabled.

The solution must have active PEFNG licenses.

WLANs must use the decrypt-tunnel forwarding option.

Firewall policies must include application filtering rules.

15. A network administrator configures an Aruba Mobility Master (MM)-based solution to provide wireless access to employees.

The solution must meet these criteria:

- Authenticate users to a network RADIUS server

- Enforce different Aruba firewall rules based on the user department

How can the administrator meet these criteria in the simplest way?

Create a different WLAN and SSID for each department. Apply different firewall policies to each WLA

Have the RADIUS server send different roles for users in different departments. Apply role-based firewall policies.

Create multiple zones on the M

Assign different departments are sets of firewall policies to different zones.

Have the RADIUS server assign users in different departments to different VLANs. Apply firewall policies based on IP ranges.

16. Users to which this policy apply are unable to receive IP addresses with DHCP.

How should the administrator fix the issue?

Move the user any svc-dhcp permitrule to the bottom of the list.

Remove the deny rule from the policy.

Use the correct service alias in the user any svc-dhcp permitrule.

Change user to any in the user any svc-dhcp permitrule.

17. An Aruba solution runs ArubaOS 8 and uses a mobility master architecture.

Which feature can network administrators use to balance wireless across APs on different channels?

AppRF

ARM

Client Match

AirMatch

18. What is the difference between how a network administrator can monitor clients in the Mobility (MM) interface and in the AirWave Management Platform?

AirWave shows trends for the past several minutes, while MM shows longer trends.

AirWave combines information from more sources, such as RADIUS authenticating servers and APs.

AirWave shows the current signal level for the client connection, while MM does not show RF statistics.

MM shows user and role information associated with clients, while AirWave does not.

19. An AP operates on channel 6.

Which device causes the most significant and consistent interference with the signal?

cellular phone

AP operating on channel 11

wireless security camera operating on channel 8

weather radar

20. What is a reason for a company to choose to deploy an Aruba 7024 Mobility Controller (MC) rather than an Aruba 7010 MC?

to support a faster firewall throughput rate

to support 802.11ac APs rather than only 802.11n APs

to support more wireless users

to support more POE devices directly connected to the MC

Page 3 of 3

21. Refer to the exhibit.

The exhibit shows output from a Mobility Master (MM) dashboard.

What is a valid reason for the administrator to click the akamai square under applications?

to see the break down for only the roles, destinations, WLANs, and devices that use this application

to download a report about the usage of this application over time

to create filter rules in order to control wireless user access to this application

to set up bandwidth rule in order to control wireless user access to this application

22. A company has an Aruba solution that supports an employee WLAN.

How can network administrators control in which subnets user receive IP addresses?

Assign switch ports connected to APs to VLANs associated with the desired subnets.

Set the VLANs associated with desired subnets in the WLAN settings.

Configure firewall policies that permit the desired subnet, and add them to the initial role for the WLA

In the WLAN settings, configure User role rules with the desired subnet addresses as match criteria.

23. A network manager wants to implement an Aruba wireless solution that accommodates 802.1X with EAPTLS. All wireless users will utilize Active Directory (AD) accounts to authenticate.

Which device will the authenticator forward the authentication requests to in this type of solution?

Mobility Master (MM)

Mobility Controller (MC)

RADIUS server

APs

24. A company wants to provide wireless access for guests with their Aruba solution.

Which configuration feature requires the customer to purchase PEFNG licenses?

redirection of guests to an external captive portal

customization of the internal captive portal login page

addition of custom rules to control access for authenticated guests

provision of DHCP services to unauthenticated guests

Aruba Certified Mobility Associate Exam HPE6-A70 Replaces HPE6-A42

Author

Leave a Reply Cancel reply