Free Practice Test for DELL EMC DEA-5TT1 Exam

Pdfprep2021-03-13T23:49:23+00:00

As a one of most important DELL EMC certification may be a good start for you. You will find a different world when you get the DEA-5TT1 certification. So you need to prepare for DEA-5TT1 actual test now. But you find that you have no much time to practice the DEA-5TT1 exam questions and no energy to remember the key knowledge of DEA-5TT1 exam. It will be a terrible thing if you got a bad result in the test. It is urgent for you to choose an effective and convenient method to prepare the DEA-5TT1 actual test. Now, our DEA-5TT1 prep questions can help you.

Page 1 of 3

1. An Ethernet switch receives a frame from a directly connected host. The source MAC address of the frame is not present in the MAC address table for the switch. However, the destination address is present in the MAC address table.

What does the switch do with the frame?

Flushes the destination MAC address and updates the MAC address table in the switch.

Adds the source MAC address and port to the MAC address table and forwards the frame.

Discards the frame on all ports and sends an error message back to the host.

Floods the frame to all ports except for the port the frame originated from to locate the source MAC address.

2. DRAG DROP

The IEEE separates the Data Link and Physical ISO layers into four sub-layers. Based on the exhibit, what is the correct order of these sub-layers; from lowest to highest?

3. What accurately describes OSPF?

Interior gateway link-state protocol

Exterior gateway distance-vector protocol

Interior gateway distance-vector protocol

Interior gateway path-vector protocol

4. What accurately describes the Network Time Protocol (NTP)?

Implemented on a Dell EMC Network OS 6.

Time synchronization algorithms do not account for clock drift.

Client synchronizes among a set of distributed time servers.

Client makes sudden changes in time to keep synchronized.

5. In which Spanning Tree protocol state does a port record MAC addresses but does not forward the data?

Forwarding

Blocking

Learning

Listening

6. Which route type is added to the routing table by a routing protocol?

Default route

Dynamic

Static

Directly connected

7. Which IP address is in the Class B range?

100.100.90.87

126.16.20.48

191.56.44.200

192.15.48.130

8. What accurately describes the comparison between stacking and VLT?

VLT allows for more physical devices to appear as one virtual device than stacking does.

Stacked switches share a common control plane while VLT peers maintain their own control plane.

Stacked switches and VLT peers allow “single pane of glass” management by maintaining a single control plane.

Both VLT and stacking allow devices to use different versions of firmware provided that the switch family/series is the same.

9. On which OSI layers do standard ACL filters operate?

2 and 3

2 and 7

3 and 4

4 and 7

10. A network administrator has a stack of four Dell EMC Networking S4800 Series switches. Each stack unit is configured with a different priority.

Which switch will be elected as the management device?

Switch with priority 0

Switch with priority 1

Switch with priority 14

Switch with priority 21

Page 2 of 3

11. DRAG DROP

What is the correct sequence of steps when a web browser accesses a web server?

12. Which port type does a Dell EMC Networking N-Series switch have for its console connection?

DB9

RJ-45

USB A

USB B

13. What are Network Address Translation (NAT) inside global addresses?

Addresses used by NAT router when sending frames to devices on the local network

Public IP addresses used by the local network to communicate with the Internet

Private IP addresses used by the local network

Pubic addresses used by other networks outside of the local network

14. Which topology is considered a best practice when stacking switches?

Ring

Cascade

Serial

Daisy-chain

15. Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global addresses?

Outside source static

Overload

Inside source static

PAT

16. What is the valid range assigned to a client during a TCP connection?

20 - 25

443 - 1000

1023 - 2024

40000 - 65535

17. Which port and protocol is used by NTP to communicate?

TCP port 123 for both the source and destination

TCP port 123 for the source and TCP port 80 for the destination

UDP port 123 for both the source and destination

UDP port 123 for the source and TCP port 80 for the destination

18. At which layer of the OSI model is the Rapid Spanning Tree protocol used to prevent switching loops?

Physical

Network

Data Link

Transport

19. Which field of the 802.3 frame is used by network interface cards to synchronize their receivers?

Start frame delimiter

Preamble

Cyclic redundancy check

Frame check sequence

20. Which type of domains are connected by a Layer 2 switch?

Single collision domain and a single broadcast domain

Multiple broadcast domains and multiple collision domains

Multiple collision domains and a single broadcast domain

Single collision domain and multiple broadcast domains

Page 3 of 3

21. Which Layer 1 device can be used to enlarge the area covered by a single LAN segment?

Router

Repeater

Switch

NIC

22. What accurately describes the Simple Network Time Protocol (SNTP)?

Time synchronization algorithms are more complex and account for clock drift.

Client makes sudden changes in time to keep synchronized.

Client synchronizes among a set of distributed time servers.

Implemented on a Dell EMC Network OS 9 and OS 10.

23. Which criteria is used to define an extended MAC ACL filter?

Destination MAC address and Ethernet frame type

Ethernet frame type and frame size

Destination TCP port number and source MAC address

Source and destination MAC addresses

24. Which IPv4 address is in the same network as the IP address 182.15.24.40/23 and assignable to a host device?

182.15.23.224

182.15.25.0

182.15.25.255

182.15.26.10

Free Practice Test for DELL EMC DEA-5TT1 Exam

Author

Leave a Reply Cancel reply