HP Certification HPE6-A72 Exam Free Dumps

Pdfprep2021-03-26T08:27:24+00:00

HPE6-A72 exam is a hot one of HP certification tests. We have cracked the latest Aruba Certified Switching Associate Exam HPE6-A72 dumps questions, which are the best material for you to study the test. With studying all of HP certification HPE6-A72 exam dumps questions, you can pass the test in the first attempt. We provide Aruba Certified Switching Associate Exam HPE6-A72 free dumps for you to check the related topics.

Page 1 of 3

1. Refer to the exhibit.

What configuration is needed in order for "show LLDP configuration" to show this output?

none; LLDP is enabled by default on Aruba switches

configuring LLDP both globally and on the interfaces

enabling LLDP on the interfaces only

configuring LLDP globally only

2. DRAG DROP

Match the term to the correct description.

3. DRAG DROP

Match each description to the correct management tool for Aruba AOS-CX.

4. Refer to the exhibit.

All switches are running Aruba OS-CX. While working in the terminal of Access-2, you are unable to reach Server-1 using SSH.

What is the correct command to ping Server-1 from Access-2 to test reachability?

Access-2# ping6 172.16.1.97 vrf mgmt.

Access-2# ping 172.16.1.97

Access-2# ping 172.16.1.97 vrf default

Access-2# ping 172.16.1.97 vrf mgmt

5. Core(config)# user admin password

Core(config)# interface mgmt

Core(config-if-mgmt)# ip static 10.254.16.89/22

Core(config-if-mgmt)# default-gateway 10.254.19.129

Core(config)# ssh server vrf mgmt

Core(config)# https-server vrf mgmt

You are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings.

Which two steps are missing? (Choose two.)

Core(config)# https-server rest access-mode read-write

Core(config-if-mgmt)# no shutdown

Core(config-if-mgmt)# no tftp-server

Core(config-if-mgmt)# enable

Core(config)# https-server rest access-mode read-only

6. What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?

Demodulation

Modulation

Propagation

Encapsulation

7. What is true about VSX? (Choose two.)

VSX is ideal for Campus access layer deployments where ease of deployment is needed.

VSX allows upgrading members with near zero downtime or loss of packets.

VSX is available on all Aruba OS-CX switches except the 6300F model.

VSX is implemented on static port switches. VSX-plus needed to stack chassis together.

VSX run separate control planes to reduce latency and improve performance.

8. DRAG DROP

Match the terms to the correct layer of the OSI model.

9. What are two features of the three-tier designs? (Choose two.)

removes the distribution layer in favor of a spine-leaf design used in modern data center deployments

adds a distribution layer to free up resources from the Core for improved performance and routing throughput

a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments

uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer

is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided

10. What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)

routing loops

costs associated with upgrading from copper to fiber

multiple frame copies leading to instability of the MAC address table

security issues with a redundant loop indicating to hackers that a back-door exists

broadcast storms

Page 2 of 3

11. Refer to the exhibit.

The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.

Which statement is true regarding how Switch-A will forward the packet?

Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.

Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VS

Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.

Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.

12. Which security benefit does SNMPv3 offer that SNMPv2 does not offer?

SSL encryption

Scopes

Data confidentially

RADIUS groups

13. Core# configure terminal

Core(config)# vrf Green

Core(config-vrf)# exit

Core(config)#

Core(config)# interface vlan 50

Core(config-if-vlan)# ?

Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?

Core(config-if-vlan)# vrf attach Green

Core(config-if-vlan)# ip vpn-instance Green

Core(config-if-vlan)# ip vrf forwarding Green

Core(config-if-vlan)# routing-context Green vrf

14. Refer to the exhibit.

You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.

What is a valid configuration for Access-2 to join the VSF stack?

Access-2# configure Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

15. Refer to the exhibit.

All four switches in the diagram have been configured with the region name "Aruba1".

What two other MSTP configurations must match for switches within the same MST region? (Choose two.)

MST region type

MST Bridge ID

MST version number

MST revision number

MST VLAN to instance mapping

16. Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)

Local

EIGRP

BGP

ISIS

RIPng

17. What connectivity commands are available on AOS-CX switches? (Choose two.)

netstatus

traceroute

ping

pathping

tracert

18. HOTSPOT

Click on the colored box that corresponds with the line that best represents Unicast traffic flow.

19. Which two options are the Layer 3 Routing protocols? (Choose two.)

BGP

LLDP

OSPF

MPLS

802.3ad

20. Which command can be used to find the serial number of an Aruba OS-CX switch?

The command inventory

The command version

The command show running-configuration

The command show system

Page 3 of 3

21. Refer to the exhibit.

Which command produces the above output?

show interface port 1/1/10 trunk

show vlan port 1/1/10

show trunk port 1/1/10 extended

show interface port 1/1/10 switchport

22. Which statement is correct regarding powering an Aruba Access Point?

PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.

Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.

PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.

Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the A

23. ServiceOS login: admin

SVOS> password

Enter password: ********

Confirm password: ********

The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.

What is the default password that is required for the admin account while under the Service OS console?

No password is set for this account.

"password"

"forgetme!"

The same login password that has lost originally.

24. Your customer has 349 users in a two-story building.

What are two benefits of a 2-Tier design? (Choose two.)

Layer 2 and Layer 3 protocols run close to the endpoints to better implement ACL and QoS policy at the edge.

Improved performance by offloading processing from the Access layer to the Core.

Use of layer 2 switches at the access layer can process and route traffic from attached APs.

Support for WAN/MPLS, Internet, and Data Center directly on the Collapsed core.

Provides a more cost effective solution given that no additional switches are required for a third tier.

HP Certification HPE6-A72 Exam Free Dumps

Author

Leave a Reply Cancel reply