Specialist - Implementation Engineer, VxRail Appliance Exam DES-6321 Online Free Test

Pdfprep2021-03-12T05:07:46+00:00

The Specialist – Implementation Engineer, VxRail Appliance Exam DES-6321 exam prep questions keeps changing time and again. That’s why Pdfprep has taken the responsibility of sending updated DELL EMC DES-6321 exam practice questions to their candidates even after the purchase of the Specialist – Implementation Engineer, VxRail Appliance Exam exam. Getting the latest updates will save you lots of time, as you will not have to check for updates each time during the preparation period of DES-6321 exam. The latest updates of DES-6321 premium questions will be sent free of charge for three months from the time of your purchase.

Page 1 of 4

1. Which command can be used from VxRail Manager VM to restart the loudmouth daemon?

systemctl restart loudmouth

systemctl restart vmware-loudmouth

/usr/lib/vmware/loudmouth/bin/loudmouth restart

/etc/init loudmouth restart

2. A system administrator wants to collect the, log bundle from their VxRail, environment.

What is the correct sequence of the REST API calls to accomplish this?

3. What is a benefit of using the VxRail REST API?

Automate security audit of VxRail appliances

Remote upgrade of iDRAC related software only

Continuous polling for performance statistics

Programmatically gather VxRail system health

4. Your customer wants to utilize non-contiguous hostnames and IP addresses.

What option should you select in the VxRail First Run Wizard?

Custom

Advanced

Expert

Detailed

5. What statement accurately describes the rail types used in racking VxRail nodes?

Static rails only support the option to use a cable management arm (CMA)

Sliding rails are available on all models of Dell 14G VxRail nodes except for the G560

Sliding rails are available on all models of Dell 14G VxRail nodes except for the S570

Static rails enable the VxRail nodes to be fully extended out of the rack for service

6. A Dell EMC solutions architect has converted the VxRail PEQ to Customer Mode. They have engaged with the customer to input information about the VxRail networks IP address, subnet mask, gateway, and VLAN ID details.

In which section would the customer input this information?

System Information

Physical Network

Es× Host Details

Virtual Machines

7. A VxRail Moel E560 Cluster will be deployed in a 1 GbE network. The system is delivered in its largest supported configuration.

How much space needs to be available to rack all the VxRail nodes?

16U

64U

8. You receive the error "Invalid target datastore specified" while trying to deploy Dell EMC Secure Remote Services.

What is the recommended course of action?

Delete the SRS gateway and redeploy using the manual method

Wait 10 minutes and try again

Keep the SRS gateway powered for reference and redeploy manuall

Rename the MARVIN- Virtual- SAN datastore to ESRS_V

x86_64

9. When populating the VxRail First Run Wizard for an External vCenter solution.

What is the recommended format for hostnames?

vCenter PSC, and VxRail Manager use FODN

vCenter, PSC, and VxRail Manager use host name only

vCenter and PSC use FQDN; VxRail Manager uses host name only

VxRail Manager and vCenter use FODN PSC uses host name only

10. Which PSC option is supported for VxRail with an embedded vCenter?

Third-party load balancers

Embedded PSC

Changing the SSO domain

Changing the SSO site ID

Page 2 of 4

11. Refer to the exhibit

What does the Fabric ID shown on the GUI actually represent for the switch cluster personality profile?

Domain ID

Cluster ID

SmartFabric ID

Fabric ID

12. Match each Dell EMC Secure Remote Services related item to its description

13. Match each VxRail REST API status code to its associated text.

14. A VxRail deployment has just been completed. The vSAN backend IOPS metrics are not available for the Cluster.

What is the reason for this issue?

Data has not been populated

Health service has not be turned on

VSAN storage policy has not been assigned

Performance Service has not been turned on

15. A customer has three VxRail E560 nodes that have just been installed.

How many RP4VM licenses is the customer entitled to?

16. What Role or Privilege does the VxRail Management User account need to have assigned within vCenter when connecting to an External vCenter?

No specific role

Administrator

Readonly

HCIA

17. You have been assigned to perform a hardware installation of three G560 nodes in a 4-post rack.

However, only static rails are included with this shipment.

What is the best way to proceed?

Order sliding rails, since these are required for the installation

Install cable management arms in the rack

You cannot proceed because these nodes cannot be installed in 4-post rack

Proceed directly because these nodes can be installed in a 4-post rack

18. After deployment, where would you look first on a VxRail v4.7.1xx Cluster for errors as they occur?

marvin.log

VxRail Manager GUI

Icm.log

vCenter GUI

19. You are about to perform a VxRail deployment in a Dell EMC SmartFabric configuration.

What does the VxRail First Run Squire as an input when configuring the discovered SmartFabric Switch Cluster?

REST_USER password

Admin user password

Domain ID, Uplink Interfaces, and ICL interfaces

Fabric ID and switch personality mode

20. When populating the VxRail First Run Wizard for an External vCenter solution, what is the recommended format for hostnames?

vCenter, PSC, and VxRail Manager use FQDN

VxRail Manager and vCenter use FQDN: PSC uses host name only

vCenter and PSC use FQDN: V>Rail Manager uses host name only

vCenter, PSC, and VxRal Manager use host name only

Page 3 of 4

21. What components of a VxRail node must be assigned IP addresses?

ESXi host. Center. ESR

and iDRAC

ESXi host, vSA

Center. and ESRS

ESXi host, vSA

vMouon. and iDRAC

vSA

Center. vRealize Log Insight. and vMotion

22. A system administrator wants to check the version of the VxRail Manager Plug-In.

Where can this be done?

vSphere Client > VxRail Cluster > Configure> VxRail Support

vSphere Client > Menu Administration > Client Plug-Ins

vSphere Web Client > Menu Administration > Client Plug-Ins

VxRail Manager URL > System Health > Client Plug-Ins

23. What is the maximum number of nodes in a VxRail Cluster with 25 GbE?

128

24. Beginning with VxRail version 4.7, which product license option has changed?

VSAN

vCenter

VMware Log Insight

vSphere

25. What type of license does the Dell 4100 OS 10 Switch require to support SmartFabric Services beyond the initial trial period?

Feature specific licensing for SmartFabric Services

Full Fabric Mode licensing

SmartFabric licensing

Perpetual licensing

26. A VxRail Cluster setup with P570F nodes is used for product evaluation purposes at customer sites. Before moving the Cluster to another customer site. it needs to be reset.

Where is the image located to complete this task?

MB Server

IDSDM

SATADOM

BOSS

27. How long does it take for the Primary node to be selected for a VxRail deployment after all nodes have been powered on?

15 to 20 seconds

5 to 10 minutes

5 to 10 seconds

15 to 20 minutes

28. What are all of the menu option choices available in the RASR factory reset procedure when booting from the RASR ISO?

RASR RESET CREATE RASRUSB FACTORY RESET UPDATE FIRMWARE EXIT

RASR RESET CREATE RASRUSB FACTORY RESET REBOOT UPDATE FIRMWARE QUIT

RASR RESET CREATE RASRUSB FACTORY RESET QUIT

RASR RESET CREATE RASRUSB FACTORY RESET REBOOT UPDATE FIRMWARE EXIT

29. You are validating a VxRail deployment of six V570F nodes each with four 10 Gb connections. The VxRail nodes have not been powered on.

You need to ensure that the Dell EMC ToR switch is configured correctly.

Which command should you use to do this?

show port-channel summary

show interface status

show interface trunk

show running-config

30. How many nodes can be added simultaneously to an easting VxRail Cluster?

Page 4 of 4

31. You have determined that you need to execute a RASR factory upgrade of a VxRail v4.7.1xx node. You download the RASR ISO from the Dell Support site.

What is the correct order of steps to finish the upgrade?

32. What VxRail VSAN storage policy should NOT be changed or deleted after the initial setup?

VM Encryption Policy

VSAN Default Storage Policy

VxRAIL-STORAGE-PROFILLE

VxRAIL-SYSTEM-STORAGE-PROFILE

33. In which VxRail models is the iDRAC NIC Selection Setting set to Dedicated?

P570, V570, and S570 only

E560 and G560 only

P570, V570, S570 and G560

E560, P570. V570, and S570

34. What is the correct sequence of steps used by the VxRail NVT workflow?

35. What is the primary use of the VxRail PEQ Addendum?

Specifying Dell EMC- deployed switches and Stretched Clusters

Generating the NVT/FDC JSON configuration file

Deploying customer provided, non-Dell EMC network switches

Manually configuring VxRail Manager

36. What is the default VLAN ID of the Private Management VLAN network on a VxRail 4.7.x node?

3939

4095

37. Where are the vSAN logs stored?

Standard ESXi host logs

Master vSAN node

VSAN appliance VM

vCenter logs

38. By design, which network is required to have IPv6 Multicast enabled in order to set up a VxRail with version 4.7.100?

Public management network

VSAN network

vMotion network

Private management network

39. Which requirement must be met when expanding a VxRail G560F 3 node Cluster with a 4th G Series node in the same chassis?

Node must be a hybrid node

Node requires only the same processor type

Node requires only the same drive configuration

Node must be identical to the other three nodes

40. During a VxRail 2 node Cluster deployment, what is a valid connectivity option?

2×10 GbE

4×25 GbE

4 x1 GbE

2×25 GbE

Specialist – Implementation Engineer, VxRail Appliance Exam DES-6321 Online Free Test

Author

Leave a Reply Cancel reply