Which action is required if an engineer wants to have Cisco Unified Communications Manager configuration for an MGCP gateway?

Which action is required if an engineer wants to have Cisco Unified Communications Manager configuration for an MGCP gateway?
A . Upload the custom configuration in the TFTP server in cisco Unified C
C . Configure the Cisco Unified CM’s IP in voice service VoI
E . Apply the ccm-manager configuration commands to the gateway.
F . From Cisco Unified CM > Device > Gateway > Add gateway, check the auto-configuration check box.

View Answer

Answer: D

Explanation:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/cucm_

b_system-configuration-guide-1201/cucm_b_system-configuration-guide-

1201_chapter_01001.html

Step 1

From Cisco Unified CM Administration, choose Device > Gateway.

Step 2

Click Add New.

Step 3

From the Gateway Type drop-down list, select the gateway and click Next.

Step 4

From the Protocol drop-down list, choose MGCP and click Next.

Step 5

In the Configured Slots, VICs and Endpoints area, perform the following steps:

From each Module drop-down list, select the slot that corresponds to the Network Interface Module hardware that is installed on the gateway.

From each Subunit drop-down list, select the VIC that is installed on the gateway.

Click Save.

The Port icons appear. Each Port icon corresponds to an available port interface on the gateway.

You can configure any port interface by clicking the corresponding port icon.

Step 6

Complete the remaining fields in the Gateway Configuration window. For more information on the

fields, see the system Online Help.

Step 7

Click Save.