Scenario: Based on a discussion between a Citrix Architect and team of Workspacelab has been created across three (3) sites.
They captured the following requirements during the design discussion held for NetScaler design projects:
– All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configuration and design.
– Both external and internal NetScaler MPX appliances will have Global Server Load balancing (GSLB) configured and deployed in Active/Passive mode.
– GSLB should resolve both A and AAA DNS queries.
– In the GSLB deployment, the NDR site will act as backup for the DC site. whereas the DR site will act as backup for the NDR site.
– When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.
– On the internal NetScaler, both front-end VIP and back-end SNIP will be part of the same subnet.
– USIP is configured on the DMZ NetScaler appliances.
– The external NetScaler will act default gateway for back-end servers.
– All three (3) sites (DC, NDR, and DR) will have two (2) links to the Internet from different service providers configured in Active/Standby mode.
Which design decision must the architect make to meet the design requirements above?
A . Interface 0/1 must be used for DNS traffic.
B . The SNIP of the external NetScaler must be configured as default gateway on the back-end servers.
C . ADNS service must be used with IPv6 address.
D . Policy-Based Route with next hop as CISCO IPS must be configured on the external NetScaler.
Answer: C
Leave a Reply