A new employee is unable to access any network resources. All other users are able to access the network at 100Mbps No IP address, subnet mask or default gateway is displayed on the new employee’s workstation.
The network administrator determinates all connectors using the correct standard Upon further investigation the network administrator also notices the following:
Wire map results from the user patch cable lo the patch cable connecting to the switch:
– Pins 5 and 7 are short
– The distance is 200ft (61m)
Additional observations on the switch
– The VLAN is set correctly
– The port is not disabled
– The duplex "speed settings are correct
– Port LEOs are off for that port.
– The port is set to untagged.
Which of the following is the MOST likely reason the new employee is having network issues?
A . Bad switchport
B . Incorrect pinout
C . Open/short
D . VLAN mismatch
E . Distance limitation
Answer: A
Leave a Reply