Which two configurations should you perform?

You have an Azure subscription that contains three virtual networks named VNet1, VNet2, VNet3. VNet2 contains a virtual appliance named VM2 that operates as a router.

You are configuring the virtual networks in a hub and spoke topology that uses VNet2 as the hub network.

You plan to configure peering between VNet1 and VNet2 and between VNet2 and VNet3.

You need to provide connectivity between VNet1 and VNet3 through VNet2.

Which two configurations should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A . On the peering connections, allow forwarded traffic.
B . On the peering connections, allow gateway transit.
C . Create route tables and assign the table to subnets.
D . Create a route filter.
E . On the peering connections, use remote gateways.

View Answer

Answer: B C

Explanation:

Allow gateway transit: Check this box if you have a virtual network gateway attached to this virtual

network and want to allow traffic from the peered virtual network to flow through the gateway. The peered virtual network must have the Use remote gateways checkbox checked when setting up the peering from the other virtual network to this virtual network.

References: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-managepeering#

requirements-and-constraints